Steel Wire Braided Hydraulic Hoses / Cr0910

Recommended For: High pressure hydraulic oil lines.
Tube: Black, oil resistant synthetic rubber. (Nitrile).
Reinforcement: Two braids of high tensile steel wire.
Cover: Black, extra abrasion resistant and oil resistant synthetic rubber. Skiving of cover is required with Bitelok T200 & T700 Series Crimp Couplings and B Series Field Attachable Couplings.
Temperature Range: From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc.  
Working Pressure: Dynamic working pressures (in systems with pressure surges or variable loads) are based on 4:1 minimum burst to working pressure safety factor. Static working pressures (in systems with constant loads without pressure spikes) are based on 3:1 minimum burst to working pressure safety factor.

Flame Resistance: Complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS2660 and Methods of Test AS1180.10B and 13A. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labour, Mine Safety and Health Administration.
Couplings: Bitelok T200 One Piece (sizes 1/4” to 1.1/4”)  
Bitelok T700 One Piece (sizes 3/8” to 2”) p
Assembly instructions T200 and T700  
Field Attachable B Series (sizes 1/4” to 2”)