EN 857 1SC single wire braid hydraulic hose for tight routing
Reinforced by one high tensile wire braid, EN 857 1SC hydraulic hose has similar performance as its counterpart SAE 100R1 besides tighter bending radii. Ozone and weather resistant cover separate the tube from the outside environment and effectively extend the service life of hose. Single wire braided 1SC high pressure hydraulic hose is suitable for high pressure conditions where tight routing is required.
EN 857 1SC Hose
Product description:
Tube: Oil resistant synthetic rubber;
Cover: abrasion and ozone resistant synthetic rubber;
Reinforcement: one braid of high tensile wire;
Max working pressure: 3260psi (22.5Mpa);
Working temperature: -40 to 100°C (-40 to 212°F);
Min bend radius: 75mm;
Inside diameter: 1/4" to 1";
Safety factor: 4:1;
Pressure grade: high.
| EN 857 1SC High Pressure Hydraulic Hose | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Part No. | Metric Size |
Inch Size |
SAE Dash Size |
Hose I.D. |
Reinforcement Dia. |
Hose O.D. | Max. Working Pressure |
Min Bend Radius |
|||
| Min | Max | Min | Max | Max | psi | bar | mm | ||||
| H1SC-4 | 6.3 | 1/4 | -4 | 6.1 | 6.9 | 9.6 | 10.8 | 13.5 | 3260 | 225 | 75 |
| H1SC-5 | 8 | 5/16 | -5 | 7.7 | 8.5 | 10.9 | 12.1 | 14.5 | 3120 | 215 | 85 |
| H1SC-6 | 10 | 3/8 | -6 | 9.3 | 10.1 | 12.7 | 14.5 | 16.9 | 2610 | 180 | 90 |
| H1SC-8 | 12.5 | 1/2 | -8 | 12.3 | 13.5 | 15.9 | 18.1 | 20.4 | 2320 | 160 | 130 |
| H1SC-10 | 16 | 5/8 | -10 | 15.5 | 16.7 | 19.8 | 21 | 23 | 1885 | 130 | 150 |
| H1SC-12 | 19 | 3/4 | -12 | 18.6 | 19.8 | 23.2 | 24.4 | 26.7 | 1520 | 105 | 180 |
| H1SC-16 | 25 | 1 | -16 | 25 | 26.4 | 30.7 | 31.9 | 34.9 | 1280 | 88 | 230 |
Inquiry for Our Product
Shengmingjie Hose Hebei Co., ltd
Email:
sales@hydraulichoses.org
When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.