Steel Wire Braided Hydraulic Hoses / Cr0901

Recommended For: High pressure hydraulic oil lines.
Tube: Black, oil resistant synthetic rubber. (Nitrile).
Reinforcement: One braid of high tensile steel wire.
Cover: Black, oil and abrasion resistant synthetic rubber.
No skiving required with Bitelok T200 & T700 Series Crimp Couplings and K Series Field Attachable Couplings.
Temperature Range: From -40°C to +100°C (-40°F to +212°F).
For water, emulsions etc. see page 175.
Working Pressure: Dynamic working pressures (in systems with pressure surges or variable loads) are based on 4:1 minimum burst to working pressure safety factor. Static working pressures (in systems with constant loads without pressure spikes) are based on 3:1 minimum burst to working pressure safety factor.

Flame Resistance: All sizes meet Flame Resistant Designation
“GL” Germanischer Lloyd. T124A and T132A meet Flame
Resistant Designation “U.S. MSHA” of the US Department of
Labor, Mine Safety and Health Administration.      Couplings: BITELOK NON-SKIVE ONE PIECE CRIMP
T200 (sizes 1/4” to 1.1/4”) pages 82 to 97.
T700 (sizes 3/8” to 2”) pages 102 to 113.
Assembly Instructions page 180.
FIELD ATTACHABLE
K Series (sizes 1/4” to 1”) refer to RYCO.
*A Series (sizes 1.1/4” to 2”) refer to RYCO.